It is important for every home to have various tools so as to perform some tasks that don’t necessarily require a technician. One of the tools that you must consider having in your house is a plumbing isolation valve. The device is quite easy to use especially for people who have knowledge about plumbing. The tools enable you to close the water system in the case where you are carrying out maintenance services such that you don’t end up wasting water.
Features of the plumbing isolation.
The isolation valves are designed with small taps on them which are usually coloured in either red or blue colour.The valve is also equipped with a screw whereby a person is required to use a slot head screwdriver to turn the valve off or on. The pin is usually located at the centre of the valve, and one is expected to make a quarter turn so as to unscrew it. CGIS – Valve Store recommends the usage of plumbing isolation valves and screws in different situations around the house, outlined in the article below.
How does the isolation valve function work?
The valve is usually on when the slot of the isolation screw is aligned with the pipe, and in this case, the water can flow. On the other hand, the valve is usually off when the slot is running across the tube.
Where are plumbing isolation valve located?
Isolation valves can be found in all areas with tap water but are commonly found in the kitchen taps washing machines, dishwasher, and the bathrooms taps as well. You can check in all the areas that have taps fixed in your house and see if you can find these valves. It is quite difficult to find the gadgets in older homes as the trend of using the valves is new and can only be found in new homes. For those living in old houses, you can have the gadgets fixed by a professional plumber who can do it by changing some of the plumbing systems.
How to set isolation valves.
For those who prefer fixing their plumbing issues, the isolation valve is a must have as they are easy to use and work with as well. All you have to do is making a quarter turn to shut down the water supply and get to fix your plumbing issue.The valves are widely used when performing plumbing fixings and fittings on taps and toilet.
How to use isolation valve in fixing taps.
• Turn the valve to the off side.
• Open the tap so as to let out the water stuck between the valve and the tap.
• Then dissemble the tap so you can fix the problem or change it if you wanted to fit a new one.
• After you are done turn the isolation back to the on position, and you are ready to go.
How to use isolation valve for the toilet.
• Just like in the water tap, turn the valve to the off position and empty the toilet cistern.
• Then carry out your maintenance activities or fittings.
How to replace kitchen and bathroom fittings using isolation valves.
It is frustrating and annoying to get home from work and find your house flooded with water from either your kitchen or bathroom. Well in such emergencies one can be able to fix the issue without even calling a technician. This is because as long you can turn off the water systems completely, you will be able to view where the problem is coming from and be in a position to entirely fix it. If the tap needs change, you can easily do so, and the same case applies to the cistern of your toilet.
We can boldly conclude that each home should consider investing in these gadgets as they are helpful for both fitting and fixing plumbing emergencies as they make plumbing much easier and quick too.